Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chesapeake, VA
Chesapeake is a city of large lots, long driveways, and gates that have been opening and closing through years of humid summers and freeze-thaw winters. Most homes here went up between the 1980s and the 2010s, which means a lot of driveway gates are now aging into their first real round of hardware and post work. If your gate is dragging, swinging the wrong way, or an operator has quit responding, we can help. We’re a gate-only specialist working on the brand you already have. Call (844) 410-6351 and we’ll get you scheduled.
Why Chesapeake Homes Are Different
Chesapeake sits at the edge of the Great Dismal Swamp, with tidal rivers threading through and heavy clay soils underneath. That combination causes year-round ground movement. Gate posts heave, sag, and rust faster here than in neighboring cities. The same water table that shifts a post can flood a driveway, so gate work in Chesapeake often starts with drainage, not hinges.
The humid subtropical climate doesn’t help. Hot summers bring intense thunderstorms and nor’easters, and winter freeze-thaw cycles work the posts loose a little more each year. Rust and wood rot follow close behind.
Then there’s the housing stock. Decades of large-lot single-family homes with wooden privacy fences and driveway gates mean lots of aging hardware. In older sections of Deep Creek and Great Bridge, century-old farm gates still hang on original brick or cypress posts. When modern steel hardware gets bolted onto that weathered wood, the fastener usually fails before the gate itself does.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Chesapeake Services
These are the two things Chesapeake homeowners, HOA managers, and commercial property owners call us about most.
Gate Repair in Chesapeake
Most gate repair calls in Chesapeake trace back to ground movement and moisture. A post heaves an inch after heavy rain, the gate swings out of level, and suddenly the latch misses or the panel drags the driveway. We diagnose the actual cause instead of shimming the symptom, then correct the post, the hinge, or the hardware. Wood rot on original cypress posts around Deep Creek is common, and so is steel hardware that has rusted through at the fastener. For that work, see Gate Repair in Chesapeake.

Electric Gate Repair in Chesapeake
Automated gates in Chesapeake face the same humidity that rots wood, and it gets into control boards, motors, and sensors just as readily. We work with the logic and control systems of the brand you have, not a one-size-fits-all reset. Safety edges, photo eyes, and limit switches are usually where a failing operator shows its first symptoms. Our technicians have up to 9 years of experience with LiftMaster, FAAC, BFT, Linear, and the rest of the brands we service. For automation-specific work, see Electric Gate Repair in Chesapeake.

Gate Installation in Chesapeake
Gate installation in Chesapeake has to account for what the ground does under the gate over years, not just what it looks like on day one. With clay soils that shift with every wet season and freeze-thaw cycle, the footing depth and drainage matter as much as the panel. We handle Gate Installation for residential driveways, HOA entrances, and commercial access points, from manual swing gates to full automated systems.
Because we install what we repair, the brand you choose and the operator you pair with it are decisions we make with you on the same visit, not something you have to coordinate between two companies. A residential driveway gate with a Mighty Mule or Ghost Controls operator is a different job than a heavy commercial slide gate running a DoorKing or Elite system, and we treat them that way.
Automatic Gate Installation
Signs you need it
You’re manually opening a gate several times a day, or a hand-pushed gate has started to stick and a manual fix isn’t holding up to the weather.
What it costs in Chesapeake
Automatic gate installation in Chesapeake typically runs $3,500 to $8,500, depending on the operator you choose and whether the gate already has power nearby.
How we do it
We measure the opening and check soil and drainage, walk you through operator options by brand, pull the power run if needed, set the posts to proper footing depth, hang the gate, program the travel limits and safety edges, and test everything before we leave.
Electric Gate Installation
Signs you need it
You want keypad, remote, or intercom control from the driveway, or you’re moving from an aging residential operator to a commercial-grade system.
What it costs in Chesapeake
Electric gate installation in Chesapeake typically runs $2,800 to $7,500, with the operator brand and the power run driving most of the difference.
How we do it
We spec the operator to the gate weight and duty cycle, plan the power and conduit route, install the operator, mount and align the safety edges and photo eyes, wire the access control, and run a full open-close cycle test.
What Gate Installation Costs in Chesapeake
| Item | Typical range in Chesapeake |
|---|---|
| Automatic gate installation | $3,500 – $8,500 |
| Electric gate installation | $2,800 – $7,500 |
| Driveway gate installation | $2,200 – $6,500 |
What does automatic gate installation include in Chesapeake?
It includes the operator, posts set to proper footing depth, travel-limit and safety-edge programming, and a full cycle test. Power runs are quoted separately. The written estimate sets the final price before any work starts.
Can you install a gate on a lot with drainage issues?
Yes. Heavy clay and a high water table are common on Chesapeake lots, so we check drainage during the measure. Post depth and footing material are adjusted to keep the gate stable through wet seasons instead of waiting for the next nor’easter to shift it.
Brands We Service in Chesapeake
We work on the brand you already have. Our technicians are familiar with LiftMaster, FAAC, BFT, Linear, and the other operators found on Chesapeake gates, from residential to commercial grade. That means brand-specific diagnostics on control boards and safety sensors instead of guesswork. Take a look at our brands to see the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chesapeake, VA
| Service | Typical range in Chesapeake |
|---|---|
| Automatic gate installation | $3,500 – $8,500 |
| Electric gate installation | $2,800 – $7,500 |
| Driveway gate installation | $2,200 – $6,500 |
In Chesapeake, what pushes a gate installation up is usually the ground: heavier clay, a deeper footing, or a drainage correction before the operator ever goes on. Hauling power across a long driveway adds to it as well. The estimate is free and the price is quoted and agreed before any work starts, so there are no surprises once the job is underway.
Neighborhoods We Serve in Chesapeake
We work throughout Chesapeake, from the older sections with original cypress posts to newer subdivisions with steel and vinyl gates. Whether you’re near the Great Dismal Swamp edge or on a tidal river lot, the response is the same: fast dispatch from 7am to 7pm, Sunday through Friday.
- Deep Creek
- Great Bridge
- Greenbrier
- Western Branch
Service Area – Cities Near Chesapeake
Our gate work reaches beyond Chesapeake into the surrounding cities across Hampton Roads, all with the same gate-only focus. If you’re in Norfolk, VA, Virginia Beach, VA, Hampton, VA, or Newport News, VA, we can schedule you for the same kind of on-site diagnosis and written estimate. Call (844) 410-6351 and we’ll confirm your address against our coverage before we book.
Serving Chesapeake, VA – Our Local Coverage Area
We serve Chesapeake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chesapeake
We cover all of Chesapeake, including Deep Creek, Great Bridge, Greenbrier, and Western Branch, plus the river lots and rural edges. Call (844) 410-6351 and give us your address; we’ll confirm coverage and schedule the visit.
Most cities require a permit when a gate installation involves new electrical service or a structural post, so check with the city’s building department before you schedule. We’ll walk you through the power and footing details so you know what to ask about.
We dispatch Sunday through Friday, 7am to 7pm. For a repair or an operator that’s down, same-day service is often possible depending on the schedule. Installation and new gates are measured, ordered, and scheduled. Call (844) 410-6351 and we’ll find the earliest opening.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Chesapeake Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Kristen Norris"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Heather Delaney"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Megan Whitaker