Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Norfolk Homeowners
A gate that won’t close right, an operator that’s been limping along for months, or a driveway with no controlled access at all – these are the situations that bring people to us. Gate Repair Norfolk installs new gates and automated systems for homeowners, HOA managers, and commercial property owners across the city, and we handle both the hardware and the electronics that make it move. Our technicians have up to 9 years of experience, and we work on the brand you already have rather than pushing you toward something unfamiliar. Because we specialize in gates and nothing else, we can size an operator to your gate’s actual weight and swing instead of guessing. Whether you need a simple driveway gate or a full access-control setup, our gate repair norfolk specialists can help you plan the right system.
Call (844) 410-6351 to talk through your project. We answer 24/7, and installation estimates are free.
Automatic Gate Installation
Automatic Gate Installation is the job of fitting a gate with a motorized operator so it opens and closes without anyone pushing it by hand. You need it when a manual gate has become a daily hassle, when an HOA wants controlled entry without a guard, or when a property needs a reliable barrier that a child or a delivery driver can’t leave standing open. What we do is measure the opening, match an operator to the gate’s weight and travel, and wire the safety devices that keep the gate from closing on a person or a car. Automatic systems are quoted after we look at the gate and the power situation, and the written estimate sets the final price before any work begins. For a system that’s failing rather than being installed, our electric gate repair service is the place to start.
Sizing the Operator to the Gate
A residential swing gate and a heavy commercial slide gate demand very different operators. We weigh the leaf, check the hinge or track condition, and pick an operator rated for that load so the motor isn’t straining from day one. Getting this right is most of the reason a gate lasts.
Safety Devices and Controls
Every automatic gate needs reversing sensors, and most need a photo-eye across the opening plus a stop circuit. We fit those and set the logic so the gate reverses cleanly when something is in the way. Keypads, remotes, and entry intercoms are wired in at the same time.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the full job of putting a new gate in place, from choosing the gate and operator to mounting it, wiring it, and testing it under load. You need these services when there’s no gate yet, when an old gate is beyond economical repair, or when a property’s access needs have changed and the existing setup no longer fits. Gate Repair Norfolk installs manual and automated gates and treats both as one job so you aren’t chasing two contractors. We handle LiftMaster and Linear operators on residential work and heavier FAAC gear on commercial openings, matching the brand to the duty cycle. Costs depend on the gate, the operator, and the site, and we quote per job with a free written estimate before anything is ordered. If your current gate just needs repair instead, our norfolk service covers that too.
New Gate or Repair Decision
Sometimes a gate is worth repairing and sometimes it’s throwing money at a failing frame. We look at the hinges, the posts, and the operator before recommending either path. You get an honest call on which one makes sense.

Site Prep and Footing Depth
Gate posts are only as solid as their footing, so we set them to proper depth for the gate’s weight and the soil. A gate that leans or drags usually traces back to this step. We check the ground and plan the footing before the hardware goes in.

Electric Gate Installation
Electric Gate Installation is fitting an automated gate that runs from mains power rather than a battery or solar setup. It’s the right choice when a gate gets heavy daily use, when the property needs dependable access control, or when a battery operator keeps running down. This is the part of gate work that sets a specialist apart from a general handyman: the wiring, the control board, and the logic that ties the motor to its safety sensors all have to be right. We work with LiftMaster and BFT electric operators and know their control boards and fault behavior well enough to commission a system that runs clean. Because electric gate work involves mains voltage and moving machinery, always have a trained professional handle the wiring and never open an operator’s power enclosure yourself. Pricing is set per job by the written estimate.
Power Run and Conduit
An electric gate needs a proper circuit run to the operator, usually underground in conduit. We plan the run and the disconnect location as part of the estimate so there are no surprises. The wiring is done to code for the equipment.
Control Board Commissioning
Once the motor is mounted, the control board has to be set for travel limits, speed, and safety reversal. This is where a gate either runs smoothly or fights itself. We tune it on site and test every cycle.
Driveway Gate Installation
Driveway Gate Installation puts a gate across the vehicle entrance to a home or business, sized and hung so it clears the driveway surface and swings or slides without scraping. You need it when you want to control who drives in, contain pets or children, or add a physical barrier to the property line. A driveway gate is a bigger piece of hardware than people expect, and the posts, hinges, and operator all have to handle vehicle-scale loads. We plan the opening, the swing clearance, and the footing before anything is fabricated, then install and test the finished gate. Norfolk properties vary a lot in driveway width and grade, so we measure on site rather than working from a standard size. Expect a free written estimate that sets the price before work starts.
Swing vs. Slide for Driveways
A swing gate needs clear room to arc open, while a slide gate needs a track or cantilever space alongside the driveway. We look at the driveway layout and the slope and recommend whichever fits without eating too much space. Each has its own operator and safety needs.
Handling Grade and Slope
Driveways with a slope need special attention because a heavy gate on an incline can drift or slam. We check the grade and set the operator and stops to account for it. A flat-footing assumption on uneven ground leads to trouble later.
Sliding Gate Installation
Sliding Gate Installation fits a gate that rolls along a track or cantilevers open to the side, which suits driveways where there’s no room for a swinging gate to arc inward. You need it when a swing gate won’t fit the layout, when the entrance is wide, or when traffic needs to keep flowing without an operator swinging a heavy leaf into the path. Sliding gates come in tracked and cantilever styles, and each has its own foundation and operator requirements. We install both and match the operator to the gate’s weight and slide length. Costs are quoted per job after we see the gate line and the track or footing area, and the written estimate is agreed before work begins. If a slide gate ever jumps its track, that’s a repair and a safety concern worth a same-day call.
Track vs. Cantilever Systems
A tracked gate runs on a rail set into the ground, while a cantilever gate carries itself on a frame and needs no ground track to clog. Cantilever setups cost more to build but avoid the leaves and debris that jam a track. We help you pick based on how the entrance is used.
Foundation and Track Alignment
A sliding gate is only as good as its foundation and the straightness of its track or guide rail. We set the footing to proper depth and align the run so the gate rolls without binding. Misalignment is the most common cause of a slide gate stalling.
Gate Opener Installation
Gate Opener Installation is fitting the motorized operator that drives an existing or new gate, separate from the gate structure itself. You need it when you already have a solid gate and want to automate it, when a worn-out opener has quit, or when you’re upgrading to an operator with better access control. The opener has to match the gate’s weight, width, and swing or slide type or it will fail early. We install LiftMaster, Linear, BFT, and FAAC operators and identify the right unit for your gate before ordering. This is a scheduled job rather than a same-day repair: we measure, order, and return to install, and a free written estimate sets the price up front. For an opener that’s failing, see our electric gate repair service.
Duty Cycle and Daily Use
A residential gate that opens a few times a day needs a lighter operator than a commercial entrance running constantly. We look at how often the gate cycles and rate the opener accordingly. An under-rated opener is a frequent cause of early failure.
Access Control and Remotes
Openers can be fitted with keypads, remotes, exit loops, and intercom entry so access suits the property. We wire these into the operator’s control board rather than bolting on mismatched parts. The result is one system that responds the way residents and visitors expect.
Gate Fabrication
Gate Fabrication is building a gate to fit an opening that standard sizes won’t cover, or replacing a gate that’s rusted, bent, or simply the wrong design for the property. You need it when a driveway is an unusual width, when a commercial entrance needs a specific look, or when an existing gate has failed structurally and a repair won’t hold. We fabricate to the measured opening and match the gate to the operator that will drive it. Norfolk has plenty of older properties with non-standard entrances, so fabrication comes up more than you’d think. Because a fabricated gate is a scheduled job, we measure, build, and install on a timeline we set with you, and the written estimate fixes the price before work begins. Heavy panels can crush if they fall, so this work is best left to the professionals rather than tackled as a DIY build.
Measuring the Opening
A fabricated gate starts with an accurate measurement of the opening, the posts, and the ground. We check level and any slope so the gate clears without dragging. Getting the number right is what makes the rest fit.
Matching Gate to Operator
A gate built for a specific operator runs better because the weight and travel are known from the start. We design the gate around the drive system rather than adapting afterward. That saves trouble during commissioning.
Brands We Service
We work on the brand you already have, and we know where each one tends to wear out. LiftMaster operators are common on residential driveways, and we’re familiar with their control boards and safety-reversal behavior. FAAC is heavier commercial gear, and we understand its logic systems and how it handles continuous duty. BFT operators are found on both residential and commercial gates, and we can diagnose their fault codes and travel-limit issues. Linear openers are straightforward once you know their limits and failure points.
We also service Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which span entry-level residential to heavy-duty commercial systems. From Mighty Mule to FAAC, we handle the brand-specific diagnostics that a general handyman can’t. Whether you have LiftMaster or any other make, we can help – and if you’re not sure which operator you have, we’ll identify it on site.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate reverses randomly or stops mid-travel. This usually points to a failing safety sensor or a control board that needs resetting. Left alone, it strands residents and can let the gate close on a vehicle.
- The operator strains, clicks, or trips the breaker. A motor that labors or a breaker that trips means the electrical side needs a trained eye. Don’t keep resetting it; get the circuit checked.
- The gate drags, leans, or won’t line up with the latch. A gate that sags often traces to a footing or hinge problem that worsens with use. Catching it early avoids a full rebuild.
- A slide gate has jumped its track. A heavy gate off its track is a crush hazard and can fall. Keep people clear and call for help rather than trying to muscle it back.
- The gate won’t respond to any remote or keypad. When every input fails at once, the issue is usually power or the control board, not the remotes. That’s a diagnostics job rather than a battery swap.
Our Process, Step by Step
- 1
On-site assessment. We look at the opening, the existing gate or operator, the power situation, and the ground. We measure rather than assume, so the plan fits the actual site.
- 2
Written estimate. You get an itemized quote covering the gate, the operator, the safety devices, and the labor. The written estimate sets the final price, and nothing starts until you agree to it.
- 3
Ordering and scheduling. Once approved, we order the right gate and operator for the job and schedule an install date with you. This is planned work, so it’s measured and ordered rather than rushed.
- 4
Installation and wiring. We set posts and footings to proper depth, mount the gate and operator, run the power and control wiring, and fit the reversing sensors and photo-eyes. Every connection is made and tested.
- 5
Commissioning and handover. We set travel limits, tune the speed and reversal, test every access device, and walk you through how the system works. The gate leaves running clean.
How Much Does Gate Installation Cost in Norfolk?
Gate installation in Norfolk is priced per job by a free written estimate, because the range depends so much on the gate, the operator, and the site. A typical driveway gate installation runs on a wide scale depending on whether it’s a fabricated metal gate or a standard one, and whether it’s manual or automated. A gate opener installation on an existing gate usually costs less than a full gate-and-operator job because the gate structure is already there. Sliding gate installations tend to run higher than swing gates when a cantilever frame or a ground track has to be built. Electric gate installation adds the cost of the power run, the conduit, and the control wiring on top of the equipment.
What affects the price: the gate’s size and material, the operator’s duty rating, the length of the power run, whether footings need to be dug, and which safety devices are required. Fabrication for a non-standard opening costs more than a stock size. How to avoid overpaying: get the written estimate before anything is ordered, ask what’s included in the quote, and don’t pay for an operator rated heavier than the gate’s actual duty cycle needs. A free estimate from us covers the gate, operator, wiring, and safety devices so you can compare like for like. We quote and agree the price before any work starts.
Our Service Area Near Norfolk
We install and service gates throughout Norfolk and the surrounding cities, including hampton, virginia beach, Chesapeake, Newport News, and Williamsburg, along with Gloucester Point, Cheriton, Eastville, and Ivor. Because installation is a scheduled job, we plan it around your timeline rather than a same-day window. For repairs, we offer fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Serving Norfolk, VA – Our Local Coverage Area
We serve Norfolk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Norfolk
Gate installation is the job of putting a new gate and, if you want automation, an operator in place at an opening. It covers measuring, mounting the posts and gate, wiring the operator, and fitting the safety devices. Gate Repair Norfolk handles manual and automated gates as one job so you aren’t hiring two contractors. Call (844) 410-6351 for a free estimate.
Timing depends on the gate and the site: a stock swing gate and operator go in faster than a fabricated sliding gate with a new power run and footings. Because installation is planned work, we measure and order first, then set an install date with you. We confirm the timeline in the written estimate. Call (844) 410-6351 for a free quote.
Cost depends on the gate, the operator, and the site, so it’s priced per job by a free written estimate. A gate opener on an existing gate costs less than a full gate-and-operator install, and a fabricated or sliding gate costs more than a stock swing gate. The written estimate sets the final price before any work starts. Call (844) 410-6351 for an exact quote – estimates are free.
Yes, we service LiftMaster operators and are familiar with their control boards and safety-reversal behavior. We also work on FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can identify yours on site. Call (844) 410-6351 to book a free estimate.
Installation is scheduled work, so we measure and order rather than promise same-day fitting. For a repair, we offer same-day service where possible. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday; a call outside dispatch hours is booked into the next opening. Call (844) 410-6351.
Guarantee and warranty terms depend on the job and the equipment, so we confirm the specifics with you as part of the written estimate. We stand behind the work and will walk you through what’s covered before you commit. Call (844) 410-6351 to ask about your project.
Clear access to the opening and the power location so we can measure and work safely. Note any HOA rules or city permit requirements for your gate, and ask your city’s building department if you’re unsure whether a permit applies. Have any existing remotes or access devices ready to test. Call (844) 410-6351 to set up your free estimate.
Schedule Your Gate Installation Service in Norfolk Today
Ready to put in a gate that works the way your property needs? Call (844) 410-6351 for a free, no-obligation estimate on gate installation in Norfolk. We’ll measure the site, recommend the right gate and operator for your brand, and set the price in writing before any work begins. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Let’s get your gate back up and running.
Written by the team at Gate Repair Norfolk.