Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Norfolk Homeowners
When a gate stops opening, your property loses its first line of security and the routine you rely on every day grinds to a halt. We fix that. Gate Repair Norfolk specializes only in gates, both manual and automated systems, and our technicians have up to 9 years of experience working with the actual control boards, motors, and logic systems of the brands you already own. That means brand-specific diagnostics instead of one-size-fits-all guesswork. We handle gate repair across Norfolk and the surrounding cities, offer same-day service when the schedule allows, and quote the price in writing before any work starts. Call (844) 410-6351 to book a free estimate.
Driveway Gate Repair
Driveway Gate Repair restores the gate that controls access to your home, whether it swings open on an operator or you move it by hand. You need it when the gate drags on the ground, stops mid-travel, opens at random, or refuses to latch. We check the whole system, not just the motor: hinges, posts, tracks, arms, control boards, and safety sensors. Common fixes include adjusting a sagging gate, replacing a failed actuator, or resetting a logic board that has thrown a fault. We work on LiftMaster and FAAC operators as well as mechanical setups. A repair is priced per job by the written estimate, which we agree with you before any work starts. For automation-related faults, see our Gate Repair Norfolk page.
Sagging and Dragging Gates
When a leaf sags, the operator strains to move it and parts wear faster. We realign hinges, shim posts, and correct the hang so the gate travels cleanly again. Left alone, a dragging gate can burn out the motor.
Operator and Arm Faults
Arms that stick, clunk, or stall usually point to worn linkage or a failing actuator. We test travel limits and load, then repair or replace the failing part. You get a gate that moves smoothly instead of jerking open.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding
Gate Welding is the structural side of gate repair, and it is what holds a metal gate together when a weld cracks, a hinge tears loose, or a frame bends after impact. You need it after a vehicle bumps the gate, when rust has eaten through a joint, or when a heavy leaf starts to lean. Our technicians weld and reinforce frames, reattach hinges and stops, and straighten bent sections so the gate works as one solid piece again. We also brace weak spots that are starting to flex. This is repair welding done on site as part of a job, and the cost is set per job in the written estimate we give you first. For a full replacement instead of a fix, our gate repair service covers new installations too.
Cracked Joints and Frames
A cracked weld lets a gate flex, and flexing spreads the damage. We clean the joint, weld it properly, and check the whole frame for stress. Small cracks are worth catching before the frame fails.
Hinge and Post Repairs
Loose hinges and shifting posts are behind a lot of gates that sag or won’t close square. We reattach hardware to sound metal and square up the mounting. That keeps the gate hanging true.
Commercial Gate Repair
Commercial Gate Repair keeps an access point working for a business, HOA, or property manager where a stuck gate means blocked traffic and frustrated drivers. When an entry gate fails, a tenant gate jams, or a keypad or loop stops responding, the priority is getting it operating and keeping records straight. We diagnose commercial-grade operators like DoorKing, BFT, and LiftMaster systems, check control boards, safety loops, and access hardware, and trace electrical and operator faults that general handymen can’t identify. We understand that parking access and after-hours response matter to your operation, so we explain the fault clearly and give you a written estimate before any repair. Electrical and operator wiring on a commercial gate is dangerous work, and it belongs with a trained technician; we handle it safely. Call (844) 410-6351. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Access Control and Keypads
Entry systems fail in small, frustrating ways: a keypad that ignores codes, a loop that won’t detect a car. We test the reader, the loop, and the controller together to find the real fault. Then we fix the part that’s actually failing.
Heavy-Duty Operators
Commercial operators take more cycles and harder use than residential units. We check motors, boards, and safety edges under load. Keeping a commercial gate running protects your access and your liability.
Iron Gate Repair
Iron Gate Repair restores forged and cast iron gates that have loosened, rusted, or lost their alignment, keeping the heavy, permanent look of iron while getting the gate working again. You need it when an iron gate sags heavily, binds as it swings, or shows rust creeping into joints and hinges. Iron is unforgiving when it drifts out of true, so the fix has to address the whole structure. Our technicians realign hinges and posts, repair or weld damaged sections, replace worn hardware, and treat the points where rust is taking hold. On an automated iron gate, we also check the operator for the added weight and make sure it has the torque to handle it. Iron gate work is priced per job by the written estimate, agreed before we start. If your neighbors in Hampton need the same help, our gate repair service covers the area.
Heavy Gate Alignment
An iron gate that binds puts strain on hinges and, when powered, on the motor. We bring the gate back to square and true. That eases the load on every moving part.
Rust and Finish Failures
Rust starts where water sits and spreads into the metal. We repair the affected steel and address the corrosion points. Catching it early on iron keeps the structure sound.
Sliding Gate Repair
Sliding Gate Repair gets a gate moving along its track again when it sticks, jumps the rail, or stops partway, and it is what you need when a slide gate starts to feel heavy or comes off its line. Sliding gates carry their weight on rollers and a track, so a worn roller, a bent rail, or debris on the track will stop a gate fast. We inspect the track, rollers, guides, and operator, replace failed rollers and guides, straighten or repair the rail, and adjust the operator so the gate glides through its full travel. A slide gate that comes off the track can be heavy and unstable, so a trained technician should handle the realignment; we do that as part of the repair. Pricing is per job by the written estimate we set with you first. For combined setups, see gate repair in Virginia Beach.
Track and Roller Wear
Rollers flatten and tracks collect grit and bend over time. We replace worn rollers, clean and repair the rail, and check the guides. A gate on sound rollers runs quietly and lasts longer.
Off-Track and Derailed Gates
A derailed slide gate is heavy and can fall, so it needs careful handling. We lift it back onto the track safely and find what caused it to leave. Then we correct that cause.
Wrought Iron Gate Repair
Wrought Iron Gate Repair handles the decorative iron gates that give a home or estate its look, restoring function without ruining the design. You need it when a decorative leaf sags, a hinge pulls loose, or pitting and rust start to show in the ornamental work. Wrought iron is worked by hand, so repairs need a careful touch. Our technicians realign the gate, repair hardware and damaged scrollwork, weld breaks, and address the steel at the points where it’s failing. We keep the look of the gate intact while we get it working. On powered wrought iron, we also confirm the operator is matched to the gate’s weight and swing. The repair is quoted per job in a written estimate, agreed before any work begins.
Ornamental Detail Repairs
Decorative work is what makes the gate worth keeping, so a repair shouldn’t erase it. We mend scrollwork and castings with the design in mind. The gate holds up and still looks right.
Sagging Decorative Gates
A decorative gate can be heavy for its hinges and drift out of line. We correct the hang and reinforce the mounting. The gate swings cleanly again.
Metal Gate Repair
Metal Gate Repair covers the steel and aluminum gates that make up most residential and commercial gates, fixing the frame and hardware that hold them together. You need it when a metal gate bends, binds, rusts at the joints, or stops latching, whether it swings or slides. These gates are only as good as their structure, so the repair has to deal with the metal, not just the moving parts. Our technicians straighten bent frames, weld and reinforce weakened spots, replace hinges and latches, and correct alignment so the gate closes the way it should. On automated metal gates, we also check that the operator is set correctly for the gate’s weight. Metal gate work is priced per job by the written estimate, set before any work. Our gate repair service covers nearby homeowners too.
Frame and Structure Repairs
A bent or cracked frame drags on everything else. We straighten and reinforce the structure first. A sound frame makes the rest of the repair last.
Latch and Hardware Fixes
A gate that won’t latch leaves you with a security gap. We replace worn latches, catches, and hardware and align them to close cleanly. You get a gate that shuts securely every time.
Wood Gate Repair
Wood Gate Repair keeps a timber gate working when boards warp, a frame loosens, or the gate starts to sag under its own weight. You need it when a wood gate drags on the ground, a hinge tears free, or a leaf starts to lean. Wood moves with the weather, so the fix has to account for that. Our technicians repair and reinforce the frame, replace or re-secure boards and hardware, correct the hang so the gate swings freely, and address the joints where wood is failing. We also check any operator for a wood gate’s weight and the way it shifts. The repair is priced per job by the written estimate we agree with you first. For new gates rather than fixes, we also provide full gate installation.
Warped Boards and Frames
Warping pulls a gate out of square and jams the hardware. We repair or replace affected boards and true up the frame. A straight gate moves the way it should.
Hinge and Hardware Repair
Wood tears around loose hardware faster than metal. We repair the mounting and reattach hinges to sound wood. That stops the sag from coming back.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We work on the brand you already have, and brand-specific familiarity is the core of how we diagnose. We service LiftMaster operators and swing and slide gate systems, and we know where the control boards and logic tend to fail. We’re experienced with FAAC gate equipment, including its automation and safety hardware, and we trace faults through the actual control boards rather than guessing. We also work on BFT automation and Linear gate systems, each with its own quirks in the operator and controller.
The rest of the range we service runs from entry-level residential to heavy-duty commercial: Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. From Mighty Mule to FAAC, we bring the same brand-specific approach to each, checking motors, sensors, and logic to find the real fault. We don’t stock parts or claim to be a dealer; we diagnose and repair the system you have. Whether you have LiftMaster or any other make, we can help.
Signs You Need a Pro Right Now
- The gate stops partway or reverses on its own. That usually points to a sensor, a travel limit, or a control board fault, not just a weak motor. Ignoring it can leave an access point open or the operator damaged.
- A dangerous safety edge or sensor isn’t working. Safety edges and sensors exist to stop the gate from closing on a person or vehicle. A dead sensor is a safety issue, not a minor glitch, and it needs a technician.
- A gate has come off its track or is hanging loose. Heavy panes and many gates can crush, so a derailed or unstable gate is a hazard. Keep people clear and get it looked at quickly.
- Exposed or damaged operator wiring. The power run and operator wiring on an automated gate carry real voltage. Don’t touch exposed wiring; a trained technician should handle anything electrical.
- The gate drags, sags, or won’t latch closed. A gate that won’t close leaves your property exposed. Dragging puts constant strain on the operator and accelerates wear across the system.
Our Process, Step by Step
- 1
You call (844) 410-6351 and tell us what the gate is doing. We answer 24/7, ask the right questions about the brand and symptom, and set up a visit. Fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
We start with a diagnostic, not a guess. Our technicians read the operator’s fault codes, test the motor and control board, and check the gate’s alignment and hardware. That’s how brand-specific faults get found instead of masked.
- 3
We explain what we found in plain terms and give you a written estimate. The price is quoted and agreed before any work starts, so there are no surprises when the job is done.
- 4
We complete the repair, whether it’s a mechanical fix, a weld, or an operator and control-board repair. Then we run the gate through its full travel and test the safety features before we call it finished.
- 5
We walk you through what was fixed and what to watch for, and answer any questions while we’re on site. If you decide to upgrade the operator or gate later, we handle installation too, so there’s no chasing a second contractor.
How Much Does Gate Repair Cost in Norfolk?
Most gate repairs in Norfolk are priced per job and confirmed in a free written estimate before any work starts. The final figure depends on the gate type, the brand, and what’s actually failing, so we look at it first and give you the number in writing. A typical mechanical fix like a sagging hinge or latch runs on the lower end, while operator, control-board, or welding work runs higher because of the parts and skill involved. A commercial operator repair is usually higher still, given the heavier equipment and access hardware.
What affects the price: the gate type (swing, slide, iron, wood, or metal), the brand and how available that part is, whether the fault is mechanical or in the automation, and whether a weld or structural repair is needed. How to avoid overpaying: get the fault diagnosed before agreeing to a repair, ask for the written estimate up front, and don’t let a general handyman take a guess at a brand-specific control board. A proper diagnosis saves you from paying twice.
Every free estimate includes the diagnostic look, the explanation of the fault, and a fixed written price for the repair. There’s no service-call fee, and nothing starts until you agree to the number. Call (844) 410-6351 for an exact quote on your gate.
Our Service Area Near Norfolk
We serve Norfolk and the surrounding cities, including Hampton, Virginia Beach, Chesapeake, Newport News, and Williamsburg, along with communities like Gloucester Point, Cheriton, Eastville, and Ivor. Dispatch and arrival timing depends on where you are and the day’s schedule, so call and we’ll give you the next available window. Same-day service is often possible for repair work. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Norfolk, VA – Our Local Coverage Area
We serve Norfolk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Norfolk
Gate repair is fixing a gate that isn’t working, from the mechanical parts (hinges, frames, latches, tracks) to the automated system (operators, motors, sensors, and control boards). We handle both manual and electric gates, so one call covers the whole system. It’s different from fencing because the focus is the gate and its access control. We specialize only in gates, which is why we can diagnose brand-specific faults others can’t identify.
Many repairs are done in a single visit once we’ve diagnosed the fault, though the exact time depends on what’s failing and the parts involved. A simple hinge or latch fix is quick; an operator or control-board repair can take longer. We’ll tell you what to expect after the diagnostic. If parts are needed, we’ll give you a realistic timeline in the written estimate.
Gate repair is priced per job, with the number confirmed in a free written estimate before any work starts. What you pay depends on the gate type, the brand, and whether the fault is mechanical or in the automation. We don’t add a service-call or diagnostic fee, and nothing starts until you agree to the price. Call (844) 410-6351 for an exact quote on your gate.
Yes. We service LiftMaster operators and gate systems and work with the actual control boards and logic to find the fault. We also handle FAAC, BFT, and Linear equipment, along with Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range covers residential to commercial. We’re experienced with the brand you already have.
Same-day service is often possible when the schedule allows, so it’s worth calling. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm; we’re closed Saturday. If you call outside dispatch hours, we book you into the next opening. A call now is the fastest way to get on the schedule.
Ask us about warranty coverage on the specific repair when you call, and we’ll confirm what applies before any work starts. We set the details up front so you know what’s covered. That way there’s no ambiguity after the job.
Clear the area around the gate and make sure we can reach the operator, control panel, and any keypads. Note what the gate is doing and when it started, and tell us the brand if you know it. If the gate is derailed or hanging loose, keep people and vehicles clear until a technician arrives. A little prep helps us diagnose faster.
Schedule Your Gate Repair Service in Norfolk Today
Your gate is your first line of security, and getting it back up and running shouldn’t mean chasing down a tech who’s never seen your brand. Call (844) 410-6351 for a free, no-obligation estimate from a gate specialist. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we quote the price in writing before any work starts.
Written by the team at Gate Repair Norfolk.