Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Norfolk Homeowners
A gate that won’t open leaves you parked on the street, or worse, leaves your property open to anyone who walks up. That’s the problem we solve. Gate Repair Norfolk specializes in electric gate repair for homeowners, HOA managers, and commercial property owners across Norfolk, and we work on the brand you already have. Our technicians have up to 9 years of experience diagnosing operator, sensor, and control-board faults on systems from Mighty Mule to FAAC. We quote your price and agree on it before any work starts, so the number on the invoice matches the number we gave you. Same-day service is often possible in Norfolk. Call (844) 410-6351 for a free estimate.
Gate Opener Repair
Gate Opener Repair is what we do when the arm, the motor, or the control unit has stopped moving the gate the way it should. You need it when the gate only opens partway, reverses without warning, runs but won’t latch, or clicks and does nothing at all. A failing opener usually traces back to a worn drive gear, a bad limit switch, a tired control board, or a safety sensor that keeps tripping. We test each of those in order instead of swapping parts and hoping. A typical opener repair in Norfolk runs $150-$450 depending on the fault and the parts involved, and we confirm the price in writing before we start.
Operator Fault Diagnosis
We read the actual board, watch the limit settings, and check the travel and force limits against what the gate is doing. That tells us whether the operator is the problem or something in the gate itself is fighting it. You get a straight answer on what failed and what it takes to fix it.
Arm and Drive Repair
Swing arms, slide drives, and the linkages that connect them wear at the pivot points and the gear teeth. We replace the worn parts and re-set the travel so the gate runs without strain. Left alone, a worn drive adds load to the motor until the whole operator gives out.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair covers the parts of the system that make it work without you: the sensors, the safety edges, the loops, and the logic that ties them together. You need it when the gate hesitates, closes on a car sitting in the path, or refuses to move because a sensor thinks something is there. A photocell knocked out of line, a safety edge with a cut cable, or a failed loop detector will all stop an otherwise healthy operator cold. We trace the signal from sensor to board so the fix lands on the real cause. Automatic gate repair in Norfolk typically runs $120-$380, and the written estimate locks the price before any work begins.
Photo Eye and Safety Edge Faults
Most of the “gate won’t close” calls we get come down to a sensor problem, not a dead motor. We check alignment, wiring, and the signal at the board, then replace or re-aim what’s failed. Getting this right matters, because safety edges and photo eyes are what stop a heavy gate from closing on a person or a car.
Control Board Logic Repairs
The board decides when to open, when to reverse, and how long to hold. When the logic drifts, you get a gate that behaves randomly. We test the board against the operator’s own sequence and repair or replace what’s out of spec.
Electric Gate Motor
Electric Gate Motor work is the heart of the trade: the motor itself, its gearbox, and the power that feeds it. You need it when the motor hums without moving, trips a breaker, smells hot, or has simply reached the end of its life after years of daily cycles. We work with the motors used in your brand’s operator, whether that’s a residential FAAC arm or a heavier slide unit, and we test the electrical side as well as the mechanical. A motor repair or replacement in Norfolk usually falls between $250 and $700 depending on the motor and what has to come out to reach it. We quote it in writing first, and our technicians have up to 9 years of experience on these systems.
Motor and Gearbox Replacement
When the motor is tired, replacement is often cheaper than repeated repairs. We match the motor to the operator and the gate’s weight and duty cycle. Getting that match right is what keeps the new motor from failing early.
Wiring and Power Checks
Motor problems sometimes start at the power supply, not in the motor. We check the wiring run, the connections, and the voltage at the operator. This part of the trade carries real risk, so a trained professional should handle anything at the supply side rather than a homeowner.
Gate Access Control
Gate Access Control is the system that decides who gets in: the keypads, remotes, phone entry, card readers, and the wiring that connects them to the operator. You need it when codes stop working, keypads go dead, remotes drop out, or the HOA needs to manage entries without handing out physical keys. We diagnose residential and commercial access setups and get them working with the operator you already own. Access control repair in Norfolk typically runs $140-$400 depending on the hardware and how many entry points are involved. If you need a whole new system, we install it, so you don’t have to call a second contractor. You can read more about electric gate repair for the systems behind it.
Keypad and Remote Programming
Dead keypads and remotes that won’t take usually trace back to programming, batteries, or the receiver. We re-program, re-pair, and replace the parts that have failed. That gets your tenants and family back through the gate without new hardware.
Intercom and Card Reader Integration
Phone entry and card readers need clean wiring to the operator’s inputs. We check that link and make sure the access hardware and the operator talk to each other. When they don’t, the gate sits there while people wait.
Commercial Gate Operator
Commercial Gate Operator service covers the heavier slide and swing operators that run all day at apartment complexes, storage lots, and business parking areas. You need it when a high-cycle operator overheats, when barrier arms stop lifting, or when an access system fails at the busiest hour and cars stack up. Commercial units put far more cycles on their motors than residential ones, so duty cycle and heat are usually the first things we check. A commercial operator repair in Norfolk runs roughly $200-$650 depending on the unit and the fault. We work with DoorKing and LiftMaster commercial equipment and test the operator under load, not just at a standstill, before we call it fixed.
High-Cycle Operator Service
Operators that run hundreds of times a day need their load and limits checked against that use. We look at heat, gearing, and travel for signs of strain before they fail. Catching it early keeps the gate running through busy periods.
Safety and Access Integration
Commercial gates carry more safety hardware than residential: loops, edges, and stop circuits that all have to work together. We test each one and confirm the gate reverses correctly. Do not bypass safety devices to get a gate working; that trade is how people get hurt.
Brands We Service
We service LiftMaster equipment and know where it wears out, from the drive gears in popular residential arms to the logic in the commercial swing operators. We also work on FAAC systems and understand how their control boards behave when a sensor or limit setting is off, which saves a lot of guesswork. With BFT, we know the access and operator components and how they fail under daily residential cycles. For Linear systems, we’re familiar with the operator line and the control logic that trips when a loop or safety input misbehaves.
Across all of these, the point is the same: we work on the brand you already have instead of pushing you into a new system. Whether you have LiftMaster, FAAC, BFT, Linear, or any other make, we can help. We also install gates, so if a repair no longer makes sense, we can handle the upgrade too. See our gate repair Norfolk services for the mechanical side of the trade.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate reverses for no reason. A gate that reverses mid-travel is usually misreading a sensor or its own limits. It’s a safety problem first and a convenience problem second, so it’s worth a call before it happens again.
- The motor hums but the gate won’t move. That sound points to a worn drive gear or a seized linkage putting strain on the motor. Left running, the motor can overheat and fail completely, turning a cheaper fix into a bigger one.
- The gate opens partway and stops. Partial travel often means a limit switch out of adjustment or a control-board fault. It won’t fix itself, and each cycle adds strain to the operator.
- The keypad or remotes stop working. Dead entry hardware leaves your gate closed to you and open to whoever still has a working code. Re-programming or a receiver check usually gets control back.
- A heavy gate has come off its track or hangs crooked. A slide gate off its track or a swing gate hanging on a bent hinge can fall, and it’s a crush risk. Stop using it by hand and have a technician look before anyone gets hurt.
Our Process, Step by Step
- 1
Book the call. Call (844) 410-6351 and describe what the gate is doing. We use that to bring the right diagnostic tools and the right parts for your brand. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
- 2
On-site diagnosis. We test the operator, the sensors, the access hardware, and the gate’s own mechanics. We read the control board and watch the sequence rather than guess from symptoms.
- 3
Written estimate. You get the fault, the fix, and the price in writing before any work starts. The number we quote is the number you pay, with no surprise on the invoice.
- 4
Repair. We do the work with parts matched to your operator. If a repair isn’t the right call, we say so and lay out the installation option instead.
- 5
Test and walkthrough. We cycle the gate, confirm the safety devices reverse it correctly, and show you what failed. You leave with a working gate and a clear idea of what to watch.
How Much Does Electric Gate Repair Cost in Norfolk?
Most electric gate repairs in Norfolk fall between $120 and $700, depending on what’s failed and how involved the fix is. A typical sensor or access control repair runs $120-$400. An opener or logic repair runs $150-$450. Motor and gearbox work runs $250-$700. Commercial operator repairs often sit at the higher end because the units are heavier and the diagnostics take longer.
What moves the price: the brand and model of the operator, whether the failed part is stocked or has to be ordered, whether power or wiring needs attention, and the weight of the gate the operator has to drive. A worn drive or a bent track adds labor because the mechanical side has to be corrected too.
How to avoid overpaying: get the fault diagnosed before you agree to parts, and insist on a written price before the work begins. Be wary of anyone who quotes a motor replacement without testing the board and sensors first. We agree the price before any work starts, so you’re not guessing.
A free estimate includes the diagnosis, a clear explanation of the fault, and a written price for the fix. It’s no-obligation. Call (844) 410-6351 for an exact quote. If you’re weighing a repair against a new system, our electric gate repair page covers the same options for that area.
Our Service Area Near Norfolk
We serve Norfolk and the communities around it, including Hampton, Virginia Beach, Chesapeake, and Newport News. We also reach Gloucester Point, Williamsburg, and the Eastern Shore towns of Cheriton and Eastville, along with Ivor. Response depends on where you are and what’s on the schedule that day. For nearby work, same-day service is often possible. Call (844) 410-6351 to check timing for your address, and see our electric gate repair page for that area.
Serving Norfolk, VA – Our Local Coverage Area
We serve Norfolk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Norfolk
Electric gate repair is the work of diagnosing and fixing the motorized parts of an automated gate: the operator, motor, control board, sensors, safety edges, and access hardware. It covers everything from a gate that won’t open to a sensor that keeps it reversing. We service the brand you already have and confirm the price in writing before we start.
Most repairs take one to three hours once we’ve diagnosed the fault. Sensor and access control fixes are usually on the short end, while motor or gearbox work takes longer because the operator has to come apart. If a part has to be ordered, we’ll tell you the timeline before we leave. Call (844) 410-6351 for an exact quote.
Most electric gate repairs in Norfolk run $120-$700 depending on the fault. Sensor and access control repairs typically run $120-$400, opener and logic repairs $150-$450, and motor or gearbox work $250-$700. We quote the price in writing and agree it before any work starts. Call (844) 410-6351 for a free estimate.
Yes, we service LiftMaster equipment, along with FAAC, BFT, and Linear. We work with the actual control boards, motors, and logic for each brand rather than a generic fix. That matters when a fault looks like one thing and turns out to be the board. Call (844) 410-6351 to book a diagnosis.
Same-day service is often possible in Norfolk, and we answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 410-6351 to check the schedule for your address.
We stand behind the repairs we make, and we’ll lay out the terms in writing with your estimate so you know exactly what’s covered. This is in writing, not a verbal promise. Ask us when we quote, and we’ll put the details in front of you. Call (844) 410-6351 for the specifics on your job.
Clear the space around the gate on both sides so the technician can safely cycle it and reach the operator. If you can, note when the problem happens and what the gate does right before it fails, and make sure remotes and codes are handy for testing. If the gate is off its track or hanging, stop using it by hand. Call (844) 410-6351 with what you’ve noticed and we’ll take it from there.
Schedule Your Electric Gate Repair Service in Norfolk Today
Don’t let a gate that won’t close decide who gets onto your property. Call (844) 410-6351 for a free, no-obligation estimate, and we’ll diagnose the fault, give you a written price before any work starts, and get you back up and running. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. Whether your gate needs a repair or you’re ready to look at installation, one call covers it.
Written by the team at Gate Repair Norfolk.